Gear Inspection Machines
Gear Inspection Machines enable quick, fully automated
measurement of tooth profile, lead, pitch and run out of gears used for high
heavy duty power transmission. Continuous measurement of cluster gears, detail
& 3D measurement of tooth surface and output with comparison between
before/after heat treatment are available by means of the standard software. Up
to 850mm can be measured upon request.
Bevel Gear Inspection Machine |
Gear inspection Machine has long been considered a highly
specialized, expensive and difficult part of the gear manufacturing process,
requiring a wide variety of complicated gages, testers, dedicated CNC equipment
and highly trained experts.
Gear inspection machine for spur and bevel gears Machine
description The gear inspection machine is intended for the quality testing of
bevel gears with diameter up to 800 mm by single flank testing method. The
machine is suitable for inspection under laboratory conditions as well as for
quality testing at work process.
The double flank gear rolling inspection is an easy and
quick inspection method for gears. The inspection process can be carried out on
the shop floor. It immediately enables the user to evaluate gears with regard
to the total errors caused in production.
Roll scan inspection means that gears are scanned in
rolling contact with a special inspection gear. The instrument combines the
simple, robust and temperature stable design of the single flank gear rolling
inspection with the greatest information density of modern coordination
measuring technology, yet the measuring time remains short.
The gear-measurement software, which can be used for
beveled and rack gears in addition to cylindrical gears, is an attribute
inspection system that compares the measured flank forms to the theoretical
specified by the designer. Once an operator enters measurements into a gear
datasheet, the software generates a master gear, stores it in memory, and
generates the CNC calibration and inspection routines to industry standards.
"It drives the machine following the master trace and compares the
measurement data against a master gear," Hobart explains. "The
reports are identical to those generated by a dedicated gear inspection
machine. After a day of training, operators with limited to no experience in
gear inspection can inspect gears."
Some of Related Keyword:
|
Very valuble information, thanks.
ReplyDeleteReverse Engineering in India